產品詳情
Product Center
| ZSQ 650 | |||||||||
| 項目 | Item | 單位 | 主注射系統 | 副注射系統 | |||||
| 注射裝置 | INJECTION UNIT | A | B | C | D | A | B | C | |
| 螺桿直徑 | Screw diameter | mm | 90 | 95 | 100 | 105 | 42 | 45 | 50 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 20 | 19 | 18 | 17.1 | 21.4 | 20 | 18 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 2735 | 3048 | 3377 | 3723 | 311 | 357 | 441 |
| 注射重量 | Injection weight(ps) | g | 2489 | 2774 | 3073 | 3388 | 283 | 325 | 402 |
| 注射速率 | Injection rate | g/s | 552 | 612 | 679 | 748 | 138 | 160 | 196 |
| 注射壓力 | Injection pressure | Mpa | 184 | 165 | 149 | 135 | 203 | 177 | 143 |
| 螺桿轉速 | Screw speed | rpm | 145 | 180 | |||||
| 鎖模裝置 | CLAMPING UNIT | ||||||||
| 鎖模力 | Clamping force | kN | 6500 | ||||||
| 移模行程 | Open stroke | mm | 870 | ||||||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 880×880 | ||||||
| 最大模厚 | Max.Mold height | mm | 900 | ||||||
| 最小模厚 | Min.Mold height | mm | 350 | ||||||
| 頂出行程 | Ejector stroke | mm | 250 | ||||||
| 頂出力 | Ejector stroke | kN | 150 | ||||||
| 其他 | OTHERS | ||||||||
| 最大油泵壓力 | Max Pump pressure | kW | 16 | 16 | |||||
| 油泵電機功率 | Pump motor power | kW | 30+37 | 18.5 | |||||
| 電熱功率 | Heating power | kW | 42.8 | 12.3 | |||||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 10.2×6.10×2.71 | ||||||
| 油箱容積 | Olitank cubage | L | 1100 | ||||||
| 機器重量 | Machine weight | t | 28 | ||||||
在常規機上可配置不同規格的平面轉盤,可根據客戶需求定制。
Equipped rotary platen with different specifications on the standard machine according to customer’s needs.
造模簡易，成本低,，生產快捷。
Simplify mold design enabling reduction in production cost and lead time.
安裝在共塑注塑機上，接上機器提供的液壓動力及控制線路，轉盤可作180°往復旋轉,。
The platen can be rotated 180° to and fro when it installed on co-injection machine with turning on hydraulic power and control circuit.
內置兩組運水流道,，在盤面上提供運水喉咀,。
Two units of water channels with water outlet installed on the platen surface.
