產品詳情
Product Center
| 項目 | Item | 單位 | Z170 | ||
| 注射裝置 | INJECTION UNIT | A | B | C | |
| 螺桿直徑 | Screw diameter | mm | 42 | 45 | 50 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 311 | 357 | 441 |
| 注射重量 | Injection weight(ps) | g | 283 | 325 | 402 |
| 注射速率 | Injection rate | g/s | 138 | 160 | 196 |
| 注射壓力 | Injection pressure | Mpa | 203 | 177 | 143 |
| 螺桿轉速 | Screw speed | rpm | 180 | ||
| 鎖模裝置 | CLAMPING UNIT | ||||
| 鎖模力 | Clamping force | kN | 1700 | ||
| 移模行程 | Open stroke | mm | 435 | ||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 470×470 | ||
| 最大模厚 | Max.Mold height | mm | 520 | ||
| 最小模厚 | Min.Mold height | mm | 180 | ||
| 頂出行程 | Ejector stroke | mm | 140 | ||
| 頂出力 | Ejector stroke | kN | 50 | ||
| 其他 | OTHERS | ||||
| 最大油泵壓力 | Max Pump pressure | kW | 16 | ||
| 油泵電機功率 | Pump motor power | kW | 18.5 | ||
| 電熱功率 | Heating power | kW | 12.3 | ||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 5.04×1.43×2.12 | ||
| 油箱容積 | Olitank cubage | L | 300 | ||
| 機器重量 | Machine weight | t | 6 | ||
