產品詳情
Product Center
| 項目 | Item | 單位 | Z1300 | |||
| 注射裝置 | INJECTION UNIT | A | B | C | D | |
| 螺桿直徑 | Screw diameter | mm | 110 | 120 | 130 | 140 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 5702 | 6899 | 8348 | 9236 |
| 注射重量 | Injection weight(ps) | g | 5189 | 6278 | 7597 | 8405 |
| 注射速率 | Injection rate | g/s | 798 | 966 | 1169 | 1293 |
| 注射壓力 | Injection pressure | Mpa | 204 | 171 | 146 | 126 |
| 螺桿轉速 | Screw speed | rpm | 100 | |||
| 鎖模裝置 | CLAMPING UNIT | |||||
| 鎖模力 | Clamping force | kN | 13000 | |||
| 移模行程 | Open stroke | mm | 1420 | |||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 1280×1280 | |||
| 最大模厚 | Max.Mold height | mm | 1350 | |||
| 最小模厚 | Min.Mold height | mm | 600 | |||
| 頂出行程 | Ejector stroke | mm | 325 | |||
| 頂出力 | Ejector stroke | kN | 245 | |||
| 其他 | OTHERS | |||||
| 最大油泵壓力 | Max Pump pressure | kW | 16 | |||
| 油泵電機功率 | Pump motor power | kW | 55+55 | |||
| 電熱功率 | Heating power | kW | 66 | |||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 12.6×2.66×3.3 | |||
| 油箱容積 | Olitank cubage | L | 2100 | |||
| 機器重量 | Machine weight | t | 60 | |||
